This information is now obsolete. The MicroTally has been re-designed; for up-to-date information please visit MicroTally.com or VehicleCounts.com.

 
  • SIMPLE TO USE
  • SMALLEST SIZE
  • LIGHTEST WEIGHT
  • 12 KEYS FOR INTERSECTION
  • 4 KEYS FOR PEDESTRIANS
  • TIME STAMPS ALL KEY PRESSES
  • UP TO 256,000 KEY PRESSES
  • FLASH MEMORY
MicroTally 16

Model 1119
The BASICON MicroTally™ 16 - Model 1119 is a new generation, state of the art ,tally counter,. It’s small size and light weight reduce fatigue while counting. It’s low power design allows the unit to operate several months from a single 9V Alkaline battery.

The MicroTally 16 is intuitive and easy to use. There are no confusing displays or menus to worry about. To start a study, turn the power switch on and begin pressing the appropriate keys. When you are finished, just turn the switch off. You may record any number of studies before you download the data.

As a turning movement counter, the design of this instrument has the primary intersection movements (left, right and thru) on 12 separate keys. It takes only one keypress to record a movement. The unit beeps each time a key is pressed. This unit has four additional keys to make pedestrian counting easier.  Alternatively, these keys can be used for vehicle classifications.  In addition there are two extra keys that can be used to indicate “U” turns, pedestrians, bicycles, trucks, “OOPS!”, etc.

The MicroTally 16 records and time-stamps all keypresses, when it is on, up to 256,000 keypresses. Therefore, the same unit can be used for all sorts of studies, including turning movment counts, gaps, saturation flow rates, stop delays, vehicle classifications, speeds, and general purpose tally counting (i.e. people counting at events). At report time, any interval may be specified, from one minute up. This unit can record any number of studies, which can be mixed, between downloads.

The MicroTally 16 is powered by a single, standard, 9V alkaline battery, and will operate several months from the battery. All keypresses are stored in non-volatile Flash memory, so no data is lost if the battery must be changed in the field.

 The BASICON WinTally™ software is the key to the MicroTally unit’s features. With WinTally, you configure the MicroTally data into your desired studies and reports. The data is stored in a raw time-stamped format, therefore, you can generate multiple studies from the same data set. The downloaded raw data file is non-editable, however the generated study files may be edited. 

WinTally is a 32 bit Windows95/98/NT application, fully Year 2000 ready.

WinTally will support a variety of studies, including, turning movement counts, staturation flow rates, Stop delay, gaps, vehicle classifications, user assigned counts, and speeds. WinTally can generate intersection reports and columnar reports. In addition, WinTally can generate comma delimited files for importing into spreadsheets and databases.
 
 
 
Specifications

Model: 

1119

Size: 

5.8" x 3.6" x 1.3"

Weight (with battery):

9 oz

Material: 

High Impact Polycarbonate

Temperature Range: 

-20 to 155F

Power: 

9Vdc Battery

Average Battery Life (Alkaline):

 3 months

Slide Switch: 

Off/Hi/Lo

Key Switches: 

18

Memory:  

512Kb Flash

Recording Method: 

Time Stamp

Time resolution: 

0.0625 seconds

Recording Indicator: 

Audible beeps

Download Interface: 

RS-232 115,200 Baud

Basicon, Inc., PO Box 646, Beaverton, OR 97075-0646 -- 503-431-2152 -- Fax 503-431-2332 -- www.basicon.com