|
COMING SOON |
Size | Octopus: 3.5 by 5.8 by 2 inches
Pulser: 3.5 by 5.8 by 1.3 inches |
| Configuration | The Octopus and Pulser are in high impact polycarbonate cases which are mated together during operation. The cable connects to your existing signal cabinet loop detector outputs. | |
| Power | 9 to 24Vdc @ 30mA | |
| Connections | 8 input channels from O.C. sinking outputs or N.O. relay contacts.
Power and ground from signal cabinet supply. |
|
| Functions | Counts 1 to 8 channels of data in 5, 10, 15, 30, or 60 minute intervals | |
| Features | Cost effectively adds counting ability to existing signal cabinets.
Will interface directly into existing wiring harnesses without loading down the signals. The data in two Octopus units can be merged in the Octopus software to give you 16 simultaneous channels of data. Very useful intersection reports can be generated in the Octopus software. You can pemanently install pulser units in several signal cabinets, then use a single Octopus to gather data for short periods from each of those cabinets. |